PD Pump Configurator

PD Pump Assembly Configurator

Configure your WCB positive-displacement pump assembly and get an instant price. Custom-built in Chino, CA.

Step 1 of 8 Pump Series
Step 1 of 8
Which pump body series?
Both are WCB 316L stainless steel S-LINE port pumps. Choose based on shaft and duty requirements.
U1 Series
Round body, 316SS shafts. Standard configuration for most food and beverage applications.
U2 Series
Flat body, 17-4 hardened shafts. Heavy-duty applications with higher pressure or abrasive service.
Step 2 of 8
Which pump model?
Models represent displacement size and port diameter. Larger models move more fluid per revolution.
Model 030
1.5" S-LINE ports
0.060 gal/rev
Light–Medium duty
Model 060
2.5" S-LINE ports
0.153 gal/rev
Medium–Heavy duty
Model 130
3.0" S-LINE ports
0.253 gal/rev
High volume
Step 3 of 8
What is your fluid temperature?
Rotor type is selected based on process fluid temperature.
Standard (STD)
Fluid temperature up to ~180°F. Single mechanical seal — carbon/ceramic/FKM elastomers.
High Temp (HOT)
Fluid temperature above 180°F. Single mechanical seal with flush — carbon/ceramic/FKM elastomers.
Step 4 of 8
How much horsepower do you need?
Sterling Electric SS washdown gearmotors, inverter duty TEFC, 10:1 CT ratio, 3-phase 208–230/460V.
2 HP
Min 98 RPM
3 HP
Min 137 RPM
5 HP
Min 215 RPM
7.5 HP
Min 142 RPM
10 HP
Min 178 RPM
15 HP
Min 249 RPM
Step 5 of 8
What flow rate or speed do you need?
Enter either RPM or GPM — the other will calculate automatically based on your selected pump model.
RPM
— or —
GPM
Step 6 of 8
Fixed installation or portable cart?
Both include a 304SS rolled-edge baseplate, OSHA-type coupling guard, and jaw-type flexible coupling.
PD Pump Base
Fixed installation. 304SS baseplate with (4) adjustable legs for permanent mounting.
PD Pump Cart
Portable. Baseplate on (2) swivel + (2) rigid 5" SS casters with a fabricated push handle.
Step 7 of 8
Include a Variable Frequency Drive (VFD)?
A VFD lets you dial in exact flow rate by controlling motor speed. Worldwide Electric WorldDrive 4X — NEMA 4X rated, mounted and wired at the factory.
Yes — include VFD
Factory-mounted WorldDrive 4X. Variable speed control, NEMA 4X enclosure, pre-wired with 20 ft power cord.
No — fixed speed
Pump runs at a fixed RPM. Customer supplies and wires their own motor control.
Step 8 of 8
What is your facility voltage?
Selects the correct VFD model and electrical set for your power supply. The motor is dual-voltage (208–230/460V).
230V
3-phase, 208–230V supply
460V
3-phase, 460V supply

Your Configuration

Estimated Price
—
Includes equipment, factory assembly labor & inbound freight.
Outbound shipping quoted separately.

Bill of Materials

ItemPrice

Your Selections

Series —
Model —
Rotor —
Horsepower —
Speed —
Assembly —
VFD —
Voltage —
Estimated Price
Complete all steps to see your price